Thursday, 29 September 2016

12 Ways To Solve Low Water Pressure Problems

Many plumbing problems call for the expertise of a reputable plumber. Low water pressure is among those problems. When facing such a problem, your faucets or shower heads water stream doesn’t flow at full capacity, and you will take more time to accomplish your tasks.

Here is how to solve low water pressure problems so that you enjoy uninterrupted water supply either at home with your loved ones or in the office.

1. Replace or Fix Pressure Regulators
One of the common causes of low water pressure in some cases is a pressure regulator that is not functional. If you try to replace the pressure regulator on your own, you might end up causing more problems that will cost a lot of money to fix. Instead, call plumbing professionals to do the repair. It won’t cost you that much to repair or replace a broken regulator.

2. Repair Water Leaks
Cracked or damaged water pipes also cause a drop in water pressure because some water gets wasted. The size of the damage doesn’t matter. So, how do you determine whether the reasons for the low water pressure is a cracked or damaged pipe? The trick is to shut off all taps and check your water meter reading after a few hours. If you notice that the reading has changed, you should immediately get in touch with a certified plumber to repair the leak or leaks.

3. Take Care of Mineral Deposits
If your plumbing system comprises of galvanized iron pipes, over time they will be blocked due to mineral deposits. Besides, shower heads and faucets are also clogged by these mineral build ups preventing maximum water pressure. If you believe the deposits might be the leading cause of low water pressure, call a plumber to correct the issue.

4. Regulate Water Usage during Peak Hours
You must have realized that during peak hours when people are preparing to leave for work in the morning, the water pressure is usually low. The reason is that most people prepare to leave for work almost at the same time, and there is a high water demand. When the demand is greater than the supply, there is likely to be low water pressure. To increase water pressure in your home during these peak hours, try to reduce water usage in your home or change your schedule. It’s as simple as that.

5. Check Municipal Water Pressure
If you have tried everything to increase water pressure in your home or office with little success, try checking the municipal water pressure. Low municipal water pressure is one of the leading causes of low water pressure in most areas. Check with your neighbors to discover if they also face the same problem. If you find out that it is the primary cause, you can install larger sized pipes or install a boost pressure system.

6. Clean Faucets And Shower Heads
Is the low water pressure issue affecting only one area in your home? If that is the case, then the problem might be solved by either cleaning the faucets or shower heads. Sometimes, they are clogged and reduce water pressure in certain areas of your home significantly. Make sure that the aerator screens are unblocked. To clean clogged faucets or shower heads, use a mixture of vinegar and water.

7. Check Intake Valves
Check if the valves located between your home or office and the municipal water source are open. They sometimes shift without anyone tampering with them and without a doubt the slight changes are enough to cause a noticeable decrease in water pressure in your home. There are two valves that you should keenly observe. They are the start valve that acts as the central intake line from the meter and the customer valve found inside the meter box.

8. Choose the Right Shower Head
If your shower head has a flow constrictor, whose primary function is to reduce water pressure. To solve the low water pressure problem just remove this device. After removing it, fix the shower head back and always remember to choose the right shower head. If this doesn’t work to increase water pressure, only replace the shower head with powerful shower heads.

9. Look For A Professional Plumber
If you have been facing low water pressure issues now and then, your plumber might be the problem. Some plumbing problems such as this are bound to reoccur especially if the plumbing is unprofessional. You can contact a different plumber to take care of this issue to see if the problem will reoccur again.

10. Replace Clogged, Damaged Or Old Pipes
The size of the supply pipe plays a significant role when it comes to determining the water pressure in your home. If you believe that the diameter of the tube is responsible for the low water pressure, replace the pipe with one that has a wider diameter. Besides, you can opt to replace blocked pipes instead of cleaning the to eliminate the problem for good. Lastly, if the tubes have served for a very long time, they may get rusted and corroded due to natural wear and tear. Replace damaged or cracked pipes if you want to solve the little water pressure issue once and for all.

11. Install A Pressure Boost System
If you would like to boost the water pressure in your home or office, you can consider installing a pressure booster system. They are cheap and easy to install.

12. Check Height of Tank
If your tank is placed much higher, then the chances are that water takes long to travel, and this can reduce its pressure. If you find out that the height of the tank is the leading cause of low water pressure, contact a plumber so that it gets placed at a reasonable height that will increase water pressure in your home instead.

Final Thoughts:

Well, low water pressure problems are quite frustrating and expensive if not fixed properly and promptly. Whether it’s a leaky pipe, mineral deposits to mention a few, there are many experienced plumbers online to provide you with the top of the line plumbing services in Singapore. Their expertise, job experience, and knowledge will ensure that they fix the low water pressure issue promptly to avert further damage regardless of its severity. So, contact a plumber today and say goodbye to plumbing issues like low water pressure.